Engineering & specifications
The RP-20.
A fold-out spray booth, a sealed transfer bay and an electric batch oven — assembled on site from standard containers.
| Spray booth working length | 4.0 m |
|---|---|
| Spray booth cross-section | 2.2 m × 2.3 m |
| Oven chamber length | 6.0 m |
| Overall assembled footprint | approx. 12.4 m × 2.4 m |
| Deployment time | Under 2 hours |
| Cure cycle | 10–20 minutes typical |
| Power | Fully electric — 3-phase site supply + solar hybrid capable (no gas) |
| Insulation | 100 mm Rockwool + aluminised steel inner skin |
| Rolling racks | 1.7 m × 1.8 m |
Components
Three connected modules.
Spray Booth
4.0 m working length, removable front section, cartridge filtration and powder recovery.
Sealed Transfer Bay
Controlled rack transfer between booth and oven with alignment pins.
Powder Coating Oven
Electric batch oven, 6.0 m chamber, dedicated heater box.
Industries
Where the RP-20 works.
- Steel Fabrication
- Automotive
- Agriculture
- Mining
- Manufacturing
- Infrastructure
Spec sheet is issued on request — register your details and we'll send it through.